MarentCrafts
← All products
Vlieseline G785 roll
06 · Vlieseline® · Soft, lightweight, elastic in the weft

G785

Woven Interlining G 785

Lightweight, very fine fusible woven interlining made from synthetic fibres.

Price for G785
Invisible support for silk, viscose and delicate fabrics.
What it does

G785 is an exceptionally fine, lightweight woven interfacing with a soft feel and gentle crosswise give.

At only 30 g/m² it supports delicate garment sections while preserving comfort, softness and drape.

Its adhesive is designed to bond with difficult fabrics such as viscose, acetate and cupro — and some coated fabrics after a successful test. Because it's woven, grain direction matters.

Choose it when

The outer fabric is fine, fluid, sheer or sensitive, and ordinary interfacing would make it feel thick, stiff or papery.

What the customer is asking for

I need support, but I can't let the interfacing show through or destroy the fabric's drape.

Spec sheet
Weight
30 g/m²
Composition
100% PES
Roll width
35 in / 90 cm
Roll length
27 yd / 25 m
Colours
Off-white, Haut, Black
Fusing
Hand iron with damp cloth
Iron time
15 s
Care
Gentle wash 30°C · dry-clean P · no bleach · no tumble dry
OEKO-TEX®
Class I
Download G785 datasheet (PDF)Official Freudenberg technical data

Use it for

For the fusing of small parts in blouses and dresses and front parts of elastic jackets. Suitable for lightweight, transparent and sensitive fabrics.

Advantages
Two-way stretch
Excellent bond on difficult fabrics such as viscose, acetate, cupro and coated fabrics
Very comfortable to wear
Soft, comfortable texture

How to fuse it

Hand iron with damp cloth · 15 s · test a scrap first
1As with all Vlieseline interlinings, cut lengthwise following the direction of the thread.
2Place the interlining coated side down on the reverse of the fabric and fix at a few points at low temperature to prevent warping.
3Cover with a damp cloth and iron thoroughly, section by section, for around 15 seconds. Do not push the iron.
4After fixing, lay the pieces flat to cool for around 30 minutes to let the bond stabilise.

Best for

Blouse and dress collars, cuffs and plackets
Facings and neckline sections
Small garment pieces
Front sections of lightweight jackets and coats
Fine woven dresses and blouses
Silk and silk-like fabrics
Viscose, rayon, acetate and cupro
Lightweight transparent fabrics
Suitable coated fabrics after testing

Works best with

Lightweight woven fabrics
Sheer and semi-sheer fabrics
Fine, fluid, delicate fashion fabrics
Lightly elastic woven fabrics

Comes in Off-white, Skin tone and Black. Place a sample behind the outer fabric and check it under the lighting the finished garment will be worn in, then pick the least visible shade.

Choose something else if…

The outer fabric is a high-stretch jersey or knit — choose H609
You need a crisp, firm collar or waistband
The outer fabric is medium- or heavyweight
You're making a bag, hat or structural craft project, or need padding and loft
The project needs the interfacing to eliminate stretch completely
The fabric can't tolerate fusing
Maker tip

Cut lengthwise following the grain and pre-fix a few points at low temperature to prevent distortion. Check the pressing time on the current roll — Vlieseline's written instructions say about 8 seconds while the fusing panel says 15; the roll takes priority.

In one sentence

Choose G785 when a delicate fabric needs discreet support without losing its softness or drape.

Pairs well with
H609 when the same garment moves — a knit interlining for the stretch panels.
Also in stock
H630H640DecovilDecovil LightH609